Model No.: TPLD12025-2
1. Lathe bed work table
Lathe bed is connected from the left and right main lathe bed and bridge. It is a welded steel structure processed by the artificial aging treatment. A bearing plate is installed on the work table, and a 28mm wide T-groove is made on it for easily placing and clamping workpieces. On the left and right side of the lathe bed, two linear guides with high bearing capacity are equipped respectively for assisting the gantry longitudinal slide carriage guiding. A set of drive mechanism consisting of AC servo motor, ball-screw and screw for gantry longitudinal slide carriage movement, to ensure high precision of positioning and repositioning. M20 adjustable nuts are installed the underside of lathe bed for easily adjusting the level of work table.
2. Movable gantry
Because the lathe bed is fixed while gantry moving, the equipment occupy small area. The gantry is welded by steel plates and processed by the artificial aging treatment. Two linear guides and two NC slide carriage type power heads are installed on the front of the gantry, and a set of transfer mechanism consisting of precision Ball Screw assembly is installed on the top of gantry. The nuts on the screw assembly are connected with the AC servo motor on the two NC slide carriage by synchronizing wheel and belt. When the AC servo motor on the two NC slide carriage type power head rotates, the NC slide carriage will move along Y axis. So that ensures the precision of positioning and repositioning. Guide flexible protective covers are installed on the two sides of the power head.
3. CNC slide carriage type power head
The power head use servo motor to realize numerical feeding through reducing speed by synchronizing belt and gear, driving vertical ball-screw rotation. During work, the automatic cycle is realized from the process of fast feeding when the drill contact work pieces, changing to automatic feeding after the dill contact work pieces, changing to fast reverse after drilling through and parallel shifting to next drilling position after the drill top leave work pieces back to set position. It has the function of drilling through-hole and blind-hole, automatic chips cutting and discharging etc., so that greatly improves the production efficiency. Drill main motor of drill power head use frequency converter to regulate speed stepless which is easily operated. it is installed Quick change module of Morse no.4 taper hole under the drill spindle, with Morse 3# -- 2# --1# reducing sleeves, which can install different diameter drill under 65mm.
4. Longitudinal slide carriage
Movable gantry is installed the left and right longitudinal slide carriages, which is right-angle bending plate welding steel structure. A set of transfer mechanism consisting of AV servo motor and high precision ball-screw assembly on the left and right sides respectively. The nuts on the ball-screw assembly are connected with longitudinal slide carriages. When the AC servo motor rotates, it drives the nut to move along the ball-screw(X axis), the slide carriage moves along the guide at the same time.
5. Chip cleaner and circulation cooling system
The equipment uses one set of picking chip box type chip cleaner, which is installed in the movable cooling water tank fixing with cooling pump. The pump is used for providing coolant liquid for cooling spindle dill. The exit is connected with the sprayer fixed on power head side by hose in drag chain.
6. The positioning, alignment and clamping of work pieces
For square work pieces, alignment can be realized by fixing two direction reference blocks on the bearing plate with T-groove. For round work pieces, alignment can be realized by putting the work piece any place on the bearing plate with T-groove, then the edge finder installed in the spindle taper hole will calculate the center automatically by NC program after measuring any three points of the work piece(inner or external diameter). It is fast and precise. The work pieces are clamped by pressing plate, pull rod and setting blocks. It is very convenient to operate.
7. CNC system
CNC system use Spain FAGOR8055 to control X axis and Y axis. Coordinate setting is controlled by FAGOR8055. It is also equipped with RS232connecter and CRT display. The operation interface has functions of man-machine conversation, error compensation and automatic alarm etc. Processing program can be created automatically by inputting work piece hole position by keyboard and CAD soft ware. it has the function of preview and recheck before drilling, which is easily operated.
| X |
| T |
Width of T slot
Vertical slide type drill head
Main spindle taper hole
|Max drill diameter||Φ65mm|
|Main spindle speed||120-560r/min|
|Motor power of spindle||2×7.5kW|
Distance between spindle tip to work table
Gantry longitudinal move
| X |
Moving speed of X axis
| X |
Servo motor power of X axis/Torque
(Y)Power head transversal move
Max distance between spindles
|Y Moving speed of Y axis||0-8m/min|
| Y |
Servo motor power of Y axis/Torque
(Z)Vertical slider feeding
|ZStroke of Z axis||350mm|
|ZFeeding speed of Z axis||0-5m/min|
| Z |
Servo motor power of Z axis/Torque
|Positioning accuracy||Xx axis||≤0.25mm/Full length|
|Positioning accuracy||Y,ZY/Z axis||≤0.1mm/Full length|
Compressed air pressure
Chip cleaning and cooling
Chip cleaner type
|Plate chain type|
Chip cleaner no.
Chip cleaning speed
Chip cleaner motor power
Motor power of outer cooling water pump
Automatic lubricating system
Lubrication point oil injecting amount
CNC axis NO.
Whole power of motors
| XX |
Main parts configuration list
|Main electric components|
|1||CNC system||8055||Spain FAGOR|
|2||Servo motor+Servo driver||2KW|| Japan Panasonic |
|3||Servo motor+Servo driver||5KW|| Japan Panasonic |
Spindle servo drive
|Normally open||Korea AUTONICS|
|main mechanical parts|
|1||Ball screw||All||Taiwan HIWIN|
|2||Automatic lubrication system||BIJUR|
|3||Linear guide||All||Taiwan HIWIN|
|4||Gear rack (with anti backlash function)||X axis||Import|
|5||Worm and gear reducer||X axis||Import|
Shandong Sunrise CNC Machine Co., Ltd
SUNRISE CNC MACHINE CO.,LTD located in Jinan Economic Development Zone, is a speclist company dedicated to developing, studing, designing, manufacturing, selling CNC machines.
For example, plate drilling machine, plate punching machine , U I H Channel beam band sawing machine, angle punching marking dhearing production line, angle drilling marking production line, connector steel punching drilling machine, bending, beveling, chamfering, milling, welding machines, plasma cutting and other optical-electro-mechanical integration equipments.
Mainly used for processing angle steel, metal plate, H-beam, channel steel, box steel, round steel, flange plate and etc in power tower, transmission tower, telecom tower, steel struture, central air-conditioner, automobil, household appliance, petrochemical, construction, bridge, boiler and chemical engineering industries.
Also we built subsidiary company Sunrise CNC Technology, which for design and manufacture engraving and cutting cnc router, wood lathe, laser cutting machine, stone cnc router, fiber laser cutting machine, plasma cutting machine etc, almost of metal & nonmetal materials could cutting and engraving well.
Mainly used in wood furniture, advertising, stone industry etc.
Experienced and dynamic professionals team who are expert in handling precision work through scientific processes.
The professional excellent talents unite a powerful and creative team of design, reserch and development, which built our solid technical strength and competitiveness.
By 10 years experience, now Sunrise CNC is a leading manufacturer in China, not just for high quality, also service and honest.
Manufacturing custoner oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever.
Therefore, we never compromissed with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc. which help control quality, increased work efficiency and guaranteed products' stability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Sunrise is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle east, South America, Africa, Australia, and Europe etc.
Quality made brand, honesty win market, harmony converg talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advance and productive solutions in the cnc machine industry.
More information pls contact us feel free!
- Company Name: Shandong Sunrise CNC Machine Co., Ltd
- Representative: Guo Hongtao
- Product/Service: Angle Punching Marking Shearing Line , Angle Drilling Marking Line , Drilling Machine , Punching Machine , Beam Sawing Machine , CNC Router
- Capital (Million US $): $100.00 Millon
- Year Established: 2000
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: Jinan Sunrise CNC Machine Co., Ltd
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.8299,West of Jingshi rd. Jinan, Shandong, China
- Contact Person: Ms. Melody
- Tel: 86-0531-55611277
Premium Related Products